MATERIALS: Main frame and panels are non-thermal break, 6063- T5 extruded aluminum. Weatherstripping shall be Mylar shielded pile on all members where weatherstripping is required.
FRAMES: Frames shall have machined corners, tightly assembled and sealed at corner of frame jamb to sill. Frame depth to be 3 1/2 inches.
GLAZING: All glass is to be 5/8” insulated tempered glass.
HARDWARE: Adjustable wheel assemblies shall be corrosion resistant. Steel ball bearing type. Locking hardware shall be die cast. Key lock optional.
SCREEN: Rolling screen shall be fabricated from aluminum sections. Screens shall roll on fully adjustable roller located in both top and bottom rails with adjustment through jambs. Screen cloth shall be fiberglass mesh. Screen panel shall be equipped with latch assembly and vinyl insect seal.
PANELS: Panel jambs machined to overlap an interlock with head and sill and joined by screws fastened into head and sill. FINISH: All exposed surfaces shall have an electrostatically applied bronze or white acrylic enamel baked on finish.
INSTALLATION: Assembly and installation shall be done by others in accordance with instructions furnished. All mounting and assembly screws shall be furnished with the door.
This door provides a wide range of door panel arrangements and is typically used for interior use between two heated spaces, porch enclosures, or a garage. This door can be manufactured in custom sizes along with custom colors.
Our SERIES 880 REVERSIBLE SLIDING GLASS DOOR in white or bronze baked acrylic enamel finishes. Glazing: 5/8” tempered insulating glass. Insulating glass available in clear or colonial, optional Low E and argon. Frame KD to be assembled on-site.