The Series 1300 Sliding Window
Available in WHITE or BRONZE
with 7/8” INSULATING GLASS
Excellent for COMMERCIAL or RESIDENTIAL apartment buildings
SPECIFICATIONS
GENERAL: Double-hung windows shall be Coastal thermally improved Series 1300 manufactured by Coastal Industries Inc. and shall meet AAMA/WDMA/CSA 101/I.S.2/A440-11,NAFS 2011 –North American Fenestration Standard/Specification for Windows, Doors, and Skylights. Class CW-PG30 1422 x 2324 (56 x 91 1/2)-H
MATERIAL: All aluminum extrusions shall be 6063-T5 alloy having a nominal wall thickness of .062”, sill shall be .078”; insulation when required shall be provided by a poured-in-place polyurethane specially formulated for this purpose. Parting stops shall be black rigid vinyl extrusions. Sections shall be designed to provide complete thermal break in both frames and sash.
CONSTRUCTION: Frame shall be 3 1/4” in depth. Corners shall be butt joint construction and mechanically joined with screws. Sash members shall be designed to accommodate 7/8” sealed insulating glass. Sash corners shall be of a semi-lap type mechanically joined with stainless steel screws at each corner.
HARDWARE: Moving sash shall be equipped with two spiral balances with nylon swivel shoes. The moving sash shall have an automatic spring-action latch at top of top sash and two latches at bottom of bottom sash. All fasteners shall be aluminum, stainless steel or non-corrosive material.
WEATHERSTRIPPING: Sash and frame shall be double weatherstripped using Fin-seal or Poly-bond with flexible vinyls as required.
GLAZING: Series 1300 shall be glazed with 7/8” sealed insulating glass using wrap-around vinyl of the marine type.
SCREENS: Screens shall have extruded aluminum frames with charcoal fiberglass cloth. Half-screen is standard, full screen is available.
FINISH: Standard finish shall be baked acrylic enamel paint in either WHITE or QUAKER BRONZE.
INSTALLATION: (BY OTHERS) All windows shall be installed without racking, binding, forcing or distorting of frames or sash. Sill shall be level and jambs plumb. All caulking shall be sufficient to provide a water tight perimeter seal. It shall not be the responsibility of the manufacturer to insure against faulty or improper installation.
S/1300 INSTALLATION INSTRUCTIONS (replacement)
- Remove inside stops or window bands.
- Remove lower sash
- Remove parting bead.
- Remove upper sash.
- Remove pulleys or sash balances. Stuff cavity with insulation.
- Caulk around frame overlap head an sides.
- Install bottom expander on sill, leaving 1/16” between outer frame and expander.
- Put window into position with outer leg of sill outside bottom expander.
- Install 1 x 8 screws inside frames.
- Push up top expander channel and anchor with 2 – 1/2 x 6 screws. 11. Replace window bands.
For more information, download the brochure for this product
